Saturday, June 16, 2012
I cut 2 lengths long enough to hold the bushings next to the front of each spar. Next I punched 1/4" holes in one piece and duplicate punched them in the second piece. That way the bushings would be parallel.
I still have two tabs to add for mounting the Fin front spar but I don't want to weld them until I fit everything to the fuselage, so I'm sure the holes all line up.
Thursday, June 7, 2012
Wednesday, June 6, 2012
The edges where the bend is formed were then filed to a 1/16" radius. I like to use the radius gauge to assure I get the radius I intend.
Saturday, June 2, 2012
I got it tack welded before I lost the daylight, so I'll finish welding in the morning. I like it.